Sony HDW-750 Maintenance Manual page 167

FUNCTIN 3 Display (Setting various functions)
? 14 O FUNCTION 3
WHT FILTER INH
COLOR BAR SEL
RM COMMON MEMORY:
VTR START/STOP
USER & ALL ONLY :
Item
WHT FILTER INH
COLOR BAR SEL
RM COMMON MEMORY
VTR START/STOP *1
*1*2
USER & ALL ONLY
*1: This item is displayed only when the unit of which the ROM version of the AT board is 1.40 and higher. You can check the AT version
by the ROM VERSION display in the DIAGNOSIS menu.
*2 : This item is not displayed when the Camcorder is Serial No. 70000 and No. 80000 series.
HDW-750/750CE V1
: OFF
: 100%
OFF
: RM
OFF
Setting
OFF/ON
SMPTE/100 %/75 %/
SMPTE (4 : 3)/100 % (4 : 3)/
75 % (4 : 3)
OFF/ON
RM/CAM/PARA
OFF/ON
Function
Turns ON/OFF the function that maintains the white
balance value without regard to the CC filter (or single
filter) position.
Selects the internal color bar signal.
Sets the setup values that are connected in the event
of connecting a remote control unit (such as RM-
B150, MSU).
OFF : An independent value that is effective only
when the remote control is connected, is set.
(When the remote control is disconnected, the
value returns to the original setup before
connecting the remote control.)
ON : The setup value that is common to both
connections when a remote control is connect-
ed and when a remote control is not connected.
(When the remote control is disconnected, the
adjusted setup value remains unchanged.)
(For more details, refer to "5-10. Connecting the
Remote Control Unit" of Operation Manual.)
Sets the VTR START/STOP operation when a remote
control unit is connected.
RM: The operation is permitted to the remote control
unit only.
CAM: The operation is permitted to the camera only.
PARA:The operation is permitted both to the remote
control unit and the camera.
Turns ON/OFF the function that prohibits to display
the categories from OPERATION to DIAGNOSIS on
the TOP menu.
4-6. MAINTENANCE Menu
4-45