Rm-188 Board Replacement - Sony HDW-750 Maintenance Manual

6-19. RM-188 Board Replacement

1. Remove the outside panel assembly.
(Refer to Section 1-4.)
2. Open the inside panel assembly.
(Refer to Section 1-5.)
3. Remove the DC-DC converter.
(Refer to Section 6-8.)
4. Remove the two precision screws. While
removing the RM-188 board in the direction
of the arrow, disconnect the harness from the
connector (CN114).
5. Install the new RM-188 board by reversing
the steps of removal.
HDW-750/750CE V1
6-19. RM-188 Board Replacement
RM-188 board
CN114
Precision screw
K2.6 x 5
6-31