6-20. IF-794 Board, RX-54 Board Replacement
10. Remove the two precision screws. Remove
the hole of the WRR guide from the pin and
remove the WRR guide assembly in the
direction of the arrow.
11. Remove the two precision screws and remove
the RX-54 board.
n
Be careful not lose the connector retainer.
12. Install the new IF-794 board and RX-54
board by reversing the steps of removal.
6-34
On the side of
the outside panel assembly
WRR guide
Connector retainer
RX-54 board
Pins
Holes
WRR guide
Precision screws
P2 x 3
WRR guide assembly
Precision screws
P2 x 4.5
HDW-750/750CE V1