Sony HDW-750 Maintenance Manual page 382

7-33. T Slider Assembly Replacement
Removal
1. Removing the full top sensor
assembly
Remove the precision screw and full top sensor
assembly.
(Refer to Section 7-16.)
2. Removing the T-tension regulator
assembly
Remove the stop washer and remove the T-
tension regulator assembly.
(Refer to Section 7-22.)
3. Removing the pinch arm assembly
Remove the stop washer and remove the pinch
arm assembly.
(Refer to Section 7-29.)
4. Removing the cassette stopper
Remove the two precision screws and remove the
cassette stopper.
(Refer to Section 7-23.)
5. Removing the T rail
(1) Remove the T soft brake.
(2) Remove the six precision screws and remove
the washer.
(3) Raise the front of the T rail in the direction of
arrow A first, and then remove the T rail
together with the T slider assembly in the
direction of arrow B.
n
When removing the stop washer, do not
apply excessive force to the T gear assembly.
7-112
Precision screws
P1.4 x 3.5
T slider assembly
Precision screw
P1.4 x 3.5
A
Precision screw
P1.4 x 3.5
Brake spring of
T soft brake
B
Precision screws
P1.4 x 3.5
Stop washer
T rail
T gear assembly
HDW-750/750CE V1