Sony HDW-750 Maintenance Manual page 133

VF DISP 2 Display (Setting the VF displays)
? 05 O VF DISP 2
DISP ZOOM
DISP COLOR TEMP :
DISP VOLT
DISP DC IN
DISP WRR RF LVL :
DISP TIME CODE
DISP GPS
Item
DISP ZOOM
DISP COLOR TEMP
DISP VOLT
DISP DC IN *1
DISP WRR RF LVL
DISP TIME CODE
*2
DISP GPS
*1 : This item is displayed only when the unit of which the ROM version of the AT board is 1.40 and higher. You can check the AT
version by the ROM VERSION display in the DIAGNOSIS menu.
*2 : This item is displayed only when the HKDW-704 is connected.
'!' LED Display (Selecting the conditions to turn on the '!' indicator on VF)
? 06 O '!'LED
GAIN <!>
SHUTTER <!>
WHT PRESET <!>
ATW RUN <!>
EXTENDER <!>
FILTER <!>
OVERRIDE <!>
Item
GAIN <!>
SHUTTER <!>
WHT PRESET <!>
ATW RUN <!>
EXTENDER <!>
FILTER <!>
OVERRIDE <!>
HDW-750/750CE V1
: ON
OFF
: OFF
: OFF
OFF
: OFF
: OFF
Setting
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
OFF/ON
: ON
: ON
: ON
: ON
: ON
: OFF
: ON
Setting Function
OFF/ON OFF : Does not turn on.
ON : Turns on when GAIN is set to any position other than 0 dB.
OFF/ON OFF : Does not turn on.
ON : Turns on when the SHUTTER switch is set to ON.
OFF/ON OFF : Does not turn on.
ON : Turns on when the WHITE BAL switch is set to PRST.
OFF/ON OFF : Does not turn on.
ON : Turns on when the ATW (Auto Tracing White-balance)
is operating.
OFF/ON OFF : Does not turn on.
ON : Turns on when the lens extender is being used.
OFF/ON OFF : Does not turn on.
ON : Turns on in the following conditions:
FILTER is set in any position other than 1B.
(except serial No. 70000 series)
FILTER is set in any position other than 1A.
(serial No. 70000 series)
FILTER is set in any position other than 1 (single filter).
OFF/ON OFF : Does not turn on.
ON : Turns on when the reference value of the auto IRIS control
is set to any value other than the standard value.
Function
Turns ON/OFF the zoom display.
Turns ON/OFF the color temperature display.
Turns ON/OFF the battery (or DC IN) voltage display.
Turns ON/OFF the "DC IN" display on the VF when the
setting is DC IN.
Turns ON/OFF the wireless receiver RF level display.
Turns ON/OFF the time-code display.
Turns ON/OFF the GPS measurement status display.
4-4. OPERATION Menu
4-11