Sony HDW-750 Maintenance Manual page 131

FUNCTION 2 Display (Setting the various functions)
? 03 O FUNCTION 2
WHITE SWITCH <B>:
SHOCKLESS WHITE :
LOW LIGHT
LOW LIGHT LEVEL :
BATTERY WARNING :
Item
WHITE SWITCH <B>
SHOCKLESS WHITE
LOW LIGHT
LOW LIGHT LEVEL
BATTERY WARNING
HDW-750/750CE V1
MEM
1
: OFF
0
10%
Setting Function
MEM/ATW Sets the following modes when the WHITE BAL switch is set
to the B (B-CH) position.
ATW : Auto Tracing White-balance
MEM : Automatic white balance
OFF/1/2/3 Turns ON/OFF the function that smooths out the transition of
white balance when the WHITE BAL switch is operated. It also
sets the transition time of white balance. 1 (fast) ↔ 3 (slow)
OFF/ON Turns ON/OFF the LOW LIGHT message display function.
(it displays the warning message on screen when the average
picture level decreases below a specific level.)
(_99 to 99) Sets the video level to start displaying the LOW LIGHT
message when the above LOW LIGHT message display
function is ON.
Reference : When a menu is being displayed on screen,
10%/20% Sets the battery terminal voltage to start displaying the battery
alarm warning when using the Anton Bauer battery.
10%: Starts flashing when the battery terminal voltage
reaches at about 0.67 V.
20%: Shows the 20% indication when the battery terminal
voltage reaches at about 1.33 V and starts flashing
when it reaches at about 1.0 V.
the character "L" is displayed instead of the
message "LOW LIGHT".
(Example) LOW LIGHT LEVEL: L 0
4-4. OPERATION Menu
4-9