Sony HDW-750 Maintenance Manual page 514

11-3. Contents of Menus
C01 : FUNCTION CAM CHECK
Checks operation of the function cam automatically.
1. Select "C01: FUNCTION CAM CHECK" on the SERVO
CHECK MENU display and press the rotary encoder.
2. Press the rotary encoder again, then the self-diagnosis starts.
3. The self-diagnosis ends and the result of the self-diagnosis is
display.
When the self-diagnosis ends successfully :
The message "COMPLETE" appears.
When the self-diagnosis fails :
The message "INCOMPLETE" appears.
4. Press the ESCAPE switch to return to the SERVO CHECK
MENU display.
m
If the message "INCOMPLETE" appears (the SLACK indication
does not appear), perform the following.
1) Press the ESCAPE switch to return to the SERVO CHECK
MENU display.
2) Let the display show C01: INPUT CHECK → C005 : FUNC-
TION CAM. POS and check the faulty positions. (The arrow
mark (→) stops at the position where error occurs.)
3) Investigate the cause of the trouble by following SLACK-61
and SLACK-62 referring to Section "3. Error Diagnostics".
11-12
SERVO CHECK MENU
C01:FUNCTION CAM CHECK
PUSH RE TO CHECK
SERVO CHECK MENU
C01:FUNCTION CAM CHECK
NOW CHECKING......
SERVO CHECK MENU
C01:FUNCTION CAM CHECK
COMPLETE
HDW-750/750CE V1