Table of Contents
Advertisement
Figure 4: Hanging a J2350 Router in a Rack
3.
4.
5.
Installing J4350 or J6350 Services Routers
To install a J4350 or J6350 Services Router in a rack:
1.
2.
3.
Have a second person install a mounting screw into each of the two aligned
holes. With a number 2 Phillips screwdriver, tighten the screws.
Verify that the mounting screw on one side of the rack is aligned with the
mounting screw on the opposite side and that the router is level.
Install the second screw in each mounting bracket.
Make sure the rack is properly secured to the building in its permanent location.
Attach a screw to each rack rail in the third hole down from where you want the
top of the router to be positioned, as shown in Figure 5 on page 8. Screw only
part way in, leaving about 1/4 in. (6 mm) distance between the screw head and
the rail.
Lift the router and insert the elliptical openings in the mounting brackets onto
the partially inserted screws so that the router is hanging from the two screws.
Installing a Services Router
Installing a Services Router
7
Advertisement
Table of Contents
