Icom IC-M71 Instruction Manual page 65

CONTAINERIZED KITCHEN (CK)
OPERATION UNDER USUAL CONDITIONS
Mechanical Room Setup
1. If the CK is mounted on a trailer, install the platform to provide a safe standing area for
setting up the mechanical room. Hook one edge of the platform to the bracket on the end of
the container and support the other edge with two wing jacks.
2. Unfurl the cloth discharge ducts for the generator, exhaust fan, and air conditioner. They
should already be attached to the components via hook and loop tape at one end. Attach
them if they are not.
3. Retrieve the awning from its storage location on top of the generator. Referring to Figure
11, attach the awning by screwing the four thumbscrews into the threaded holes along the
top jamb of the mechanical room door frame.
TM 10-7360-226-13&P
Figure 10. Adjustable Spacer.
0006 00-12
0006 00