Icom IC-M71 Instruction Manual page 172

CONTAINERIZED KITCHEN (CK)
DIRECT SUPPORT MAINTENANCE PROCEDURES
DUAL OVEN ASSEMBLY
THIS WORK PACKAGE COVERS:
Inspect, Repair
INITIAL SETUP
Ovens shut down and cool
Maintenance Level
Direct Support
Tools and Special Tools
Tool Kit, General Mechanic's (WP 0052 00, Table 1, Item 1)
Shop Equipment, Welding (WP 0052 00, Table 1, Item 2)
GENERAL
This procedure contains information and instructions to keep the dual oven assembly in good
working order by inspecting and repairing its metal components and subassemblies.
INSPECT
Inspect the following dual oven assembly components for bent or cracked sheet metal, cracked
welds, and loose or missing rivets:
•
Oven base assembly
•
Oven fan assembly
•
Oven racks
REPAIR
Perform welding operations as described in TM 9-237, Operator's Manual: Welding Theory and
Application.
Replace loose or missing rivets and perform sheet metal repair as described in TM 9-510, Metal
Body Repair and Related Operations.
END OF WORK PACKAGE
TM 10-7360-226-13&P
-
0028 00 1/2 Blank
0028 00