Icom IC-M71 Instruction Manual page 160

TM 10-7360-226-13&P
CONTAINERIZED KITCHEN (CK) 0025 00
UNIT MAINTENANCE PROCEDURES
MOBILE STORAGE CABINETS
THIS SECTION COVERS:
Inspect, Test, Repair
INITIAL SETUP:
CK set up for operation
Maintenance Level
Unit
Tools and Special Tools
Tool Kit, General Mechanic's (WP 0052 00, Table 1, Item 1)
GENERAL
This procedure contains information and instructions for inspecting and making repairs to the
Mobile Storage Cabinets. Refer to WP 0042 00 for repair parts information.
INSPECT
Inspect Mobile Storage Cabinets for broken welds, damaged rivets or damaged casters. Refer
any sheet metal or weld repairs to Direct Support maintenance.
TEST
Casters: Attempt moving the storage cabinet with the casters unlocked. It should move freely
without binding of the casters. Move the cabinet in all directions to isolate the problem to a
particular caster. Check for foreign material in the caster flanges. Refer to the procedure in the
following section to replace a caster.
REPLACE
Caster: Lay the cabinet on its back. Remove and retain the caster mounting hardware. Install
the new caster using the retained hardware.
END OF WORK PACKAGE
0025 00-1/2 Blank