Icom IC-M71 Instruction Manual page 118

CONTAINERIZED KITCHEN (CK)
PREVENTIVE MAINTENANCE CHECKS AND SERVICES
THIS SECTION COVERS:
Before Operation Preventive Maintenance Checks and Services (PMCS)
INITIAL SETUP:
Kitchen Set Up for Operation
Maintenance Level:
Operator/Crew
ITEM INTERVAL
NO.
1 Before
TM 10-7360-226-13&P
Table 1. Before Operation PMCS for CK
MAN- ITEM TO BE
HOUR CHECKED OR
SERVICED
Container
0016 00-3
PROCEDURE
Inspect exterior of container for
obvious weld cracks, damage to door
hinges, handles, or seals. Check
doors for freedom of movement.
Lubricate door hinges as necessary
(WP 0051 00, Table 1, Item 6.).
Inspect cam locks for loose, missing or
damaged hardware. Inspect weather
seals for deterioration or damage.
Inspect bullseye and wing levels for
damage
Inspect jacks for damage, missing
parts, freedom of movement.
Lubricate corner jacks as necessary
(WP 0051 00, Table 1, Item 4).
Inspect stair/ladders and railings for
damage, cracked welds.
Inspect winches for missing or
damaged hardware, freedom of
movement.
Inspect winch cables for proper
tension, routing and fraying.
Inspect inner and outer fabric, floor
covering and window screens for
holes, tears, or loose seams. Inspect
hook and loop closures for damage
and proper operation.
Inspect tie-down provisions for
damage, loose or missing hardware
0016 00
EQUIPMENT
NOT READY/
AVAILABLE IF:
Container
cracked or
damaged.
Cam locks
damaged.
Jack cracked or
bent, locking pins
missing.
Any cracked
welds.
Missing or
damaged
hardware.
Any frayed strand
or more than one
flat spot on cable.
Damaged, loose,
hardware
missing.