Use the
radius-server local
(Onboard) RADIUS server commands are listed under this mode. Use the
(config-radsrv)
19.1 Radius Configuration Commands
Table 19.1
summarizes the Global Config command:
Command
authentication
ca
clrscr
crl-check
end
exit
group
Radius Server Instance
command to move to the RADIUS server mode. Local
instance to configure local RADIUS server parameters.
Table 19.1 RADIUS Server Command Summary
Description
Configure the authentication scheme used with the
RADIUS server
Defines CA parameters
Clears the display screen
Enables a Certificate Revocation List (CRL) check.
Ends the current mode and moves to the EXEC mode
Ends the current mode and moves to the previous mode
Sets RADIUS user group parameters.
Note: This command creates another sub-instance
called
config-radsrv-group
summary
with its own command
Ref.
page 19-2
page 19-3
page 19-4
page 19-4
page 19-5
page 19-5
page 19-6