Chapter 19. Radius Server Instance; Radius Configuration Commands - Motorola RFS Series Reference Manual

Use the
(config-radsrv)
Local (Onboard) RADIUS server commands are listed under this mode. To navigate to this
instance, use the command:
RFSwitch(config)#radius-server local
RFSwitch(config-radsrv)#

19.1 Radius Configuration Commands

Table 19.1 summarizes the Global Config command:
Command
authentication
ca
clrscr
crl-check
end
exit
Radius Server Instance
instance to configure local RADIUS server parameters.
Table 19.1 RADIUS Server Command Summary
Description
Configures the authentication scheme used with the
RADIUS server
Defines CA parameters
Clears the display screen
Enables a Certificate Revocation List (CRL) check
Ends the current mode and moves to the EXEC mode
Ends the current mode and moves to the previous mode
Ref.
page 19-3
page 19-5
page 19-6
page 19-7
page 19-8
page 19-9