Config-Dhcp-Class - Motorola WS5100 Series Cli Reference Manual

Usage Guidelines
Follow the steps mentioned below to create a DHCP User Class:
1. Create a DHCP class named
DHCP classes.
WS5100(config)#ip dhcp class WS5100DHCPclass
WS5100(config-dhcpclass)#
2. Create a USER class named
dhcpclass)
WS5100(config-dhcpclass)#option user-class MC800
WS5100(config-dhcpclass)#
3. Create a Pool named
WS5100(config)#ip dhcp pool WID
WS5100(config-dhcp)#
4. Associate the DHCP class, created in Step 1 with the pool created in Step 3. The switch
supports the association of only 8 DHCP classes with a pool.
WS5100(config-dhcp)#class WS5100DHCPclass
WS5100(config-dhcp-class)#
5. The switch moves to a new mode (config-dhcp-class). Use this mode to add an address
range used for the DHCP class associated with the pool.
WS5100(config-dhcp-class)#address range 11.22.33.44
Example
WS5100(config-dhcp)#class WS5100DHCPclass

17.1.3.1 config-dhcp-class

Use
(config-dhcp)# class
instance to set an address range for a DHCP user class within a DHCP server address pool.
Table 17.2
Command
address
. The switch supports a maximum of 8 users classes per DHCP class.
, using
WID
to enter the (
summarizes
config-dhcp-class
Table 17.2 DHCP Server Class Command Summary
Sets an address range for a DHCP class in a DHCP server address
pool
. The switch supports a maximum of 32
WS5100DHCPclass
. The privilege mode changes to
MC800
mode.
(config)#
config-dhcp-class)
commands.
Description
DHCP Server Instance 17-5
(config-
instance. Use this