Rate-Limit; Self-Heal - Motorola WS5100 Series Cli Reference Manual

20-38 WS5100 Series Switch CLI Reference Guide

20.1.31 rate-limit

Wireless Configuration Commands
Sets the default rate limit per user
Syntax
rate-limit {down|up}<0-100000>
Parameters
down <0-100000>
up <0-100000>
Example
WS5100(config-wireless)#rate-limit down 1000
WS5100(config-wireless)#
WS5100(config-wireless)#rate-limit up 20000
WS5100(config-wireless)#

20.1.32 self-heal

Wireless Configuration Commands
Configures Self Healing values
Syntax
self-heal(interference-avoidance|neighbor-recovery)
self-heal interference-avoidance(enable|hold-time<0-65535>|
retries<0.0-15.0>)
self-heal neighbor-recovery(action|enable|neighbors|run-neighbor-
detect)
self-heal neighbor-recovery action(both|none|open-rates|raise-
power) radio(<1-1000>|RADIO)
self-heal neighbor-recovery neighbors<1-1000>(<1-1000>|RADIO)
Sets the up link direction - from the wireless client to the
network
Defines the rate in the range of <0-100000> kbps,
0=disable rate limit
Sets the down link direction - from network to wireless
client
Sets the rate in the range of <0-100000> kbps,
0=disable rate limit