5-44
WS5100 Series Switch CLI Reference Guide
5.1.28 service
Global Configuration Commands
Use this command to retrieve system data (tables, log files, configuration, status and
operation) for use in debugging and problem resolution. To view the
User Exec and Priv Exec Mode, refer to service on page 2-5.
Syntax
service(advanced-vty|dhcp|diag|password-encryption|
pm|prompt|radius|set|show|terminal-length|watchdog)
Parameters
advanced-vty
dhcp
diag
password-encryption
pm(max-sys-restarts|
sys-restart)
prompt
radius
set
show
terminal-length
watchdog
Enables advanced mode vty interface
Enables the DHCP server service
Services diag.
Encrypts passwords in configuration.
Process Monitor.
• max-sys-restarts – Maximum number of times PM will
restart the system because of a failed processes.
• sys-restart – Enable PM to restart the system when a
processes fails.
Note: The process restart is one count less than what is
configured
Enables crash-info prompt
Enables RADIUS server
Sets service parameters
Shows running system information
System wide terminal length configuration
Enables service for watchdog
command of
service