Show - Motorola WS5100 Series Cli Reference Manual

10-10 WS5100 Series Switch CLI Reference Guide
The inbound local SPI (security parameter index) must equal the outbound remote SPI. The
outbound local SPI must equal the inbound remote SPI. The key values are the
hexadecimal representations of the keys.
They are not true ASCII strings. Therefore, a key of 3031323334353637 represents
"01234567".
WS5100(config-crypto-map)#set transformset (name)
Crypto map entries do not directly contain the transform configuration for securing data.
Instead, the crypto map is associated with transform sets which contain specific security
algorithms.
If a transform-set is not configured for a crypto map, the entry is incomplete and has no
effect. For manual key crypto maps, only one transform set can be specified.
Example
WS5100(config-crypto-map)#set localid hostname TestMapHost
WS5100(config-crypto-map)#

10.1.9 show

Crypto Map Config Commands
Displays the current system information running on the switch.
Syntax
show <paramater>
Parameters
? Displays all the parameters for which information can be
viewed using the show command