Service - Motorola WS5100 Series Cli Reference Manual

15-8 WS5100 Series Switch CLI Reference Guide

15.1.9 service

Standard ACL Config Commands
Invokes service commands to troubleshoot or debug
configurations
Syntax
service(clear|diag-shell|save-cli|show|start-shell|tethereal)
Parameters
clear
diag-shell
save-cli
show
start-shell
tethereal
Example
WS5100(config-std-nacl)#service diag-shell
Diagnostic shell started for testing
diag >
WS5100(config-std-nacl)#service save-cli
CLI command tree is saved as clitree.html.
This tree can be viewed via web at http://<ipaddr>/cli/
clitree.html
WS5100(config-std-nacl)#
WS5100(config-std-nacl)#service show ?
cli
command-history
crash-info
dump files
info
last-passwd
reboot-history
startup-log
upgrade-history
WS5100(config-std-nacl)#service show
Removes specified support information
Provides diagnostic shell access to debug and test the
switch
Saves the CLI tree for all modes (in HTML format)
Displays running system information
Provides shell access
Dumps and analyzes network traffic
Show CLI tree of current mode
Display command (except show commands) history.
Display information about core, panic and AP
Show snapshot of available support information
Display last password used to enter shell
Show reboot history
Show startup log
Show upgrade history
instance
(config-if)