Option - Motorola WS5100 Series Cli Reference Manual

18.1.7 option

DHCP Server Class Config Commands
Specifies a value for DHCP user class options
Syntax
option (user-class)(user class name)
Parameters
user-class (user class
name)
Usage Guidelines
Follow the steps below to create a DHCP user class:
1. Creates a DHCP class named
32 DHCP classes.
WS5100(config)#ip dhcp class WS5100DHCPclass
WS5100(config-dhcpclass)#
2. Create a USER class named
dhcpclass)
WS5100(config-dhcpclass)#option user-class MC800
WS5100(config-dhcpclass)#
3. Create a Pool named
WS5100(config)#ip dhcp pool WID
WS5100(config-dhcp)#
4. Associate the DHCP class, created in Step 1 with the pool created in Step 3. The switch
supports the association of 8 DHCP classes with a pool.
WS5100(config-dhcp)#class WS5100DHCPclass
WS5100(config-dhcp-class)#
5. The switch moves to a new mode (config-dhcp-class). Use this mode to an add address
range for the DHCP class associated with the pool.
WS5100(config-dhcp-class)#address range 11.22.33.44
Creates/modifies DHCP Server user class options
WS5100DHCPclass
MC800
. The switch supports a maximum of 8 user classes per DHCP class.
, using
WID (config)#
. The switch supports a maximum of
. The privilege mode changes to
mode.
DHCP Class Instance 18-5
(config-