Example-Creating A Group - Motorola WS5100 Series Cli Reference Manual

________________________________
WS5100(config-radsrv)#
19.1.7.12 Example–Creating a Group
The
(config-radsrv-group)
1. Create a group called Sales in the local RADIUS server database.
WS5100(config-radsrv)#group sales
2. Check the RADIUS user group's configuration commands.
WS5100(config-radsrv-group)#?
RADIUS user group configuration commands:
3. Use a
WS5100(config-radsrv-group)#policy ?
day
time Configure time of access policy for this group
vlan VLAN id for this group
wlan Configure wlan access policy for this group
WS5100(config-radsrv-group)#policy day weekdays
WS5100(config-radsrv-group)#policy time start 12 30 end 15 30
4. Use the
WS5100(config-radsrv-group)#policy vlan 10
5. Use the
WLAN
WS5100(config-radsrv-group)#policy wlan 1 2 5
6. Use
(config-radsrv)#rad-user
group
WS5100(config-radsrv)#rad-user testuser password testpassword group
sales
Sep 08 17:41:55 2006: RADCONF: Adding user "testuser" into local
database
Sep 08 17:41:55 2006: RADCONF: User "testuser" is added to group
"sales"
Server Trust-point : default-trustpoint
CA Trust-point
command to configure group policies for the group created in Step 1.
policy
Day of access policy configuration
command to assign a VLAN ID of 10 to the Sales group
policy vlan
command to allow only authorized users to access this group's
policy wlan
: default-trustpoint
sub-instance is explained in the example below:
to create a user called testuser and add it to the
Radius Server Instance 19-15