Mode - Motorola WS5100 Series Cli Reference Manual

9-2 WS5100 Series Switch CLI Reference Guide

9.1.1 mode

Crypto IPsec Config Commands
Use this command to configure IPSec mode of operation.
Syntax
mode(transport|tunnel)
Parameters
transport
tunnel
Example
WS5100(config-crypto-ipsec)#mode transport
WS5100(config-crypto-ipsec)#
9.1.2 show
Crypto IPsec Config Commands
Syntax
clrscr
Parameters
?
Example
WS5100(config-crypto-ipsec)#show ?
access-list
alarm-log
autoinstall
banner
boot
clock
commands
crypto
debugging
environment
file
ftp
Transport mode
Tunnel mode
Displays the parameters for which information can be
viewed using the show command
Internet Protocol (IP)
Display all alarms currently in the system
autoinstall configuration
Display Message of the Day Login banner
Display boot configuration.
Display system clock
Show command lists
crypto
Display debugging setting
show environmental information
Display filesystem information
Display FTP Server configuration