Clear - Motorola WS5100 Series Cli Reference Manual

Verify the console displays a "password successfully changed" message.
Example
WS5100#change-passwd
Enter old password:
Enter new password:
Password for user 'admin' changed successfully
WS5100#

4.1.5 clear

Priv Exec Command
Resets the current context
Syntax
clear [aclstats|alarm-log|arp-cache|counters|crypto|
ip|logging|mac-address-table|mobility|spanning-tree]
clear alarm-log (<1-65535>|acknowledge|all|new)
clear counters [all|bridge|interface(<NAME>|all|eth <1-2>|vlan <1-
clear crypto(ike|ipsec)sa(remote peer)
clear ip(dhcp(binding)[*|A.B.C.D]|nat(translation)*)
clear mac-address-table [dynamic|multicast|static]
clear mobility(mu|mu-log|peer-log|peer-statistics)
clear mobility mu(<MAC Address>|all|foreign-database|home-database)
clear spanning-tree (detected-protocols)(interface)<INTF Name>
NOTE: The console (by default), does not display a user entered
keyword for an old password and new password.
Leaving the old password and new password fields empty displays the
following error message:
Error: Invalid password length. It should be between 8 -
32characters.
4094>)|router|thread]
(address|bridge|interface|vlan)
Privileged Exec Commands 4-7