Show - Motorola WS5100 Series Cli Reference Manual

+-tls [authentication eap-auth-type (ttls-md5|ttls-pap|ttls-
mschapv2|peap-gt
c|peap-mschapv2|tls|all)]
+-ttls-md5 [authentication eap-auth-type (ttls-md5|ttls-
pap|ttls-mschapv2|pe
ap-gtc|peap-mschapv2|tls|all)]
+-ttls-mschapv2 [authentication eap-auth-type (ttls-md5|ttls-
pap|ttls-mschap
v2|peap-gtc|peap-mschapv2|tls|all)]
+-ttls-pap [authentication eap-auth-type (ttls-md5|ttls-
pap|ttls-mschapv2|pe
ap-gtc|peap-mschapv2|tls|all)]
+-ca
+-trust-point
-- MORE --, next page: Space, next line: Enter, quit: Control-C

19.1.16 show

Radius Configuration Commands
Displays current system information running on the switch
Syntax
show<paramater>
Parameters
?
Example
WS5100(config-radsrv)#show ?
access-list
alarm-log
autoinstall
banner
boot
clock
commands
crypto
debugging
environment
file
ftp
history
interfaces
ip
ldap
Displays the parameters for which information can be
viewed using the show command
Internet Protocol (IP)
Display all alarms currently in the system
autoinstall configuration
Display Message of the Day Login banner
Display boot configuration.
Display system clock
Show command lists
crypto
Display debugging setting
show environmental information
Display filesystem information
Display FTP Server configuration
Display the session command history
Interface status and configuration
Internet Protocol (IP)
ldap server
Radius Server Instance 19-25