Creating A Dhcp Option - Motorola WS5100 Series Cli Reference Manual

17-26 WS5100 Series Switch CLI Reference Guide
10.A host pool can have either
but not both.
11.An excluded address range has a higher precedence than an included address range.
Thus, if a range is part of both an excluded and included range, it will be excluded.
12.DHCP options are first defined at the global level using
<code> <type>
DHCP pool context.

17.2.4 Creating a DHCP Option

To create a DHCP option:
1. To create a non standard option named "tftp-server".
WS5100(config)#ip dhcp option tftp-server 183 ip
2. Enter the DHCP pool —"test".
WS5100(config)#ip dhcp pool test
3. Assign a value to the DHCP option configured above.
WS5100(config-dhcp)#option tftp-server 192.168.0.100
4. Exit the DHCP instance.
WS5100(config-dhcp)#exit
client-identifier
. The value for these options are defined using the
or
hardware-address
ip dhcp option <name>
option
configured,
under the