Boot; Bridge - Motorola WS5100 Series Cli Reference Manual

5.1.5 boot

Global Configuration Commands
Reboots the switch with an image in the mentioned partition (either the primary or
secondary partition)
Syntax
boot(system) [primary|secondary]
Parameters
system
primary
secondary
Example
WS5100(config)#boot system primary
Wireless switch will be rebooted, do you want to continue? (y/n):y
Do you want to save the configuration? (y/n):y
The system is going down NOW !!
% Connection is closed by administrator!
Please stand by while rebooting the system.

5.1.6 bridge

Global Configuration Commands
Configures bridge specific commands
Syntax
bridge(multiple-spanning-tree)(enable)
Parameters
multiple-spanning-tree
(enable)
Specifies the boot image used after reboot
Specifies the primary image
Specifies the secondary image
Enables Multiple Spanning Tree Protocol (MSTP)
commands
Global Configuration Commands 5-13