Host; Lease - Motorola WS5100 Series Cli Reference Manual

17.1.15 host

DHCP Config Commands
Defines a fixed IP address for the host in dotted decimal format. Use the
command to remove the host from the DHCP pool
Syntax
host <IP address>
Parameters
host <IP address>
Usage Guidelines
The DHCP host pool (used to manually assign an IP address based on hardware address/
client identifier) configuration must contain a host IP address, client name and hardware
address/client identifier.
The host IP address must belong to a subnet on the switch. There must be a DHCP network
pool corresponding to that host IP address. There is no limit to the number of manual
bindings. However, you can configure only one manual binding per host pool
Example
WS5100(config-dhcp)#host 2.2.2.111
WS5100(config-dhcp)#

17.1.16 lease

DHCP Config Commands
Sets a valid lease time for the IP address used by DHCP clients in the network pool
Syntax
lease [{<0-365> <0-23> <0-59>}|infinite]
Sets a fixed address for the host
• IP address – Sets an IP address in dotted
decimal format
DHCP Server Instance 17-13
no host