Service; Show - Motorola WS5100 Series Cli Reference Manual

19.1.7.10 service

Radius Configuration Commands
Invokes RADIUS service commands (if they have been stopped). This command enables
the RADIUS server. A RADIUS restart is executed only from the
Syntax
service(clear|diag-shell|radius|save-cli|show|start-
shell|tethereal)
service radius restart
Parameters
clear
diag-shell
radius
save-cli

show

start-shell
tethereal
Example
WS5100(config-radsrv-group)#service radius restart
WS5100(config-radsrv-group)#
19.1.7.11 show
Radius Configuration Commands
Displays current system information running on the switch
Syntax
show<paramater>
Parameters
?
Removes the specified support information
Provides diag shell access
Enables a RADIUS server restart
Saves the CLI tree for all modes in HTML
Displays running system information
Provides shell access
Dumps and analyzes network traffic
Displays the parameters for which information can be
viewed using the show command
Radius Server Instance
mode.
config
19-13