Help; Mark - Motorola WS5100 Series Cli Reference Manual

14-8 WS5100 Series Switch CLI Reference Guide

14.1.5 help

Extended ACL Config Commands
Displays the system's interactive help system
Syntax
help
Parameters
None
Example
WS5100(config-ext-nacl)#help
CLI provides advanced help feature.
anytime at the command line please press '?'.
If nothing matches, the help list will be empty and you must backup
until entering a '?' shows the available options.
Two styles of help are provided:
1. Full help is available when you are ready to enter a
command argument (e.g. 'show ?') and describes each possible
argument.
2. Partial help is provided when an abbreviated argument is entered
and you want to know what arguments match the input
(e.g. 'show ve?'.)
WS5100(config-ext-nacl)#

14.1.6 mark

Extended ACL Config Commands
Specifies packets to mark
Syntax
mark {dot1p <0-7> | tos <0-255>}} {ip} {source/source-mask | host
source | any} {destination/destination-mask
any} [log] [rule-precedence access-list-entry precedence]
mark {dot1p <0-7> | tos <0-255>}} {icmp} {source/source-mask | host
source | any} {destination/ destination-mask | host destination |
any} [icmp-type | [icmp-type icmp-code]] [log] [rule-precedence
access-list-entry precedence]
mark {dot1p <0-7> | tos <0-255>}} {tcp|udp} {source/source-mask |
host source | any} [operator source-port] {destination/destination-
mask | host destination | any} [operator destination-port] [log]
[rule-precedence access-list-entry precedence]
When you need help,
| host destination |