The following example denies ICMP traffic from any source to any destination. The
keyword any is used to match:
any source or destination IP address.
WS5100(config-ext-nacl)#deny icmp any any
WS5100(config-ext-nacl)#permit ip any any
WS5100(config-ext-nacl)#
14.1.3 end
Extended ACL Config Commands
Ends and exits the current mode and moves to the PRIV EXEC mode. The prompt changes
to
WS5100#
Syntax
end
Parameters
None
Example
WS5100(config-ext-nacl)#end
WS5100#
14.1.4 exit
Extended ACL Config Commands
Ends the current mode and moves to the previous mode (GLOBAL-CONFIG). The prompt
changes to
Syntax
exit
Parameters
None
Example
WS5100(config-ext-nacl)#exit
WS5100(config)#
WS5100(config)#
Extended ACL Instance
14-7