Chapter 17. Dhcp Server Instance; Dhcp Config Commands; Address; Bootfile - Motorola WS5100 Series Cli Reference Manual

17.1.1 address

DHCP Config Commands

Specifies a range of addresses for the DHCP network pool
Syntax
address (range) (low IP address) (high IP address)
Parameters
range (low IP address) (high IP
address)
Usage Guidelines
Use the
address
DHCP server assigns IP address to DHCP clients from the address range. A high IP address
is the upper limit for providing the IP address, and a low IP address is the lower limit for
providing the IP address
Use the
no address (range)
Example
WS5100(config-dhcp)#address range 2.2.2.2 2.2.2.50
WS5100(config-dhcp)#

17.1.2 bootfile

DHCP Config Commands
Assigns a bootfile name for the DHCP configuration on the network pool
Syntax
bootfile <filename>
Adds an address range for the DHCP server
comand to specify a range of addresses for the DHCP network pool. The
command to remove the DHCP address range
• low IP address – Defines the first IP address
in the address range
• high IP address – Defines the last IP address
in the address range
DHCP Server Instance 17-3