Client-Identifier; Client-Name - Motorola WS5100 Series Cli Reference Manual

17.1.4 client-identifier

DHCP Config Commands
Assigns a name to the client-identifier. A client identifier is used to reserve an IP address
for DHCP client
Syntax
client-identifier <ascii string>
Parameters
client-identifier
<ascii string>
Example
WS5100(config-dhcp)#client-identifier testid
WS5100(config-dhcp)#

17.1.5 client-name

DHCP Config Commands
Adds name for DHCP clients
Syntax
client-name <name>
Parameters
client-name <name>
Example
WS5100(config-dhcp)#client-name testpc
WS5100(config-dhcp)#
Prepends a null character. Use
single in the input is ignored
\
Use to add a client name. The
client-name
domain name must not be included
DHCP Server Instance 17-7
at beginning. A
\\0