Show - Motorola WS5100 Series Cli Reference Manual

Parameters
cli
Example
WS5100(config-crypto-isakmp)#service show cli
Crypto Isakmp Config mode:
+-authentication
+-pre-share [authentication ( rsa-sig | pre-share )]
+-rsa-sig [authentication ( rsa-sig | pre-share )]
+-clrscr [clrscr]
+-do
+-LINE [do LINE]
+-encryption
+-3des [encryption ( des | 3des | aes | aes-192 | aes-256 )]
+-aes [encryption ( des | 3des | aes | aes-192 | aes-256 )]
+-aes-192 [encryption ( des | 3des | aes | aes-192 | aes-256 )]
+-aes-256 [encryption ( des | 3des | aes | aes-192 | aes-256 )]
+-des [encryption ( des | 3des | aes | aes-192 | aes-256 )]
+-end [end]
+-exit [exit]
+-group
+-1 [group (1|2|5)]
+-2 [group (1|2|5)]
+-5 [group (1|2|5)]
+-hash
+-md5 [hash (sha|md5)]
...................
WS5100(config-crypto-isakmp)#

6.1.12 show

Crypto ISAKMP Config Commands
Use this command to view current system information running on the switch
Syntax
show <paramater>
Parameters
?
Displays the CLI tree of current mode
Displays all the parameters for which information can be
viewed using the show command
crypto-isakmp 6-7