Wlan-Acl - Motorola WS5100 Series Cli Reference Manual

5-62 WS5100 Series Switch CLI Reference Guide
Usage Guidelines
The wireless command is used to enter the config-wireless instance wherein you can
configure the WS5100 wireless parameters. You can confirm that you have entrered the
wireless instance as the prompt changes from the the regular
WS5100(config-wireless)#.
Example
WS5100(config)#wireless
WS5100(config-wireless)#

5.1.36 wlan-acl

Global Configuration Commands
Use this command to apply an ACL on a WLAN index.
Syntax
wlan-acl [<1-32>{<1-99>|<100-199>|
<1300|1999>|<2000|2699>|word}][in|out]
Parameters
<1-32>[]
Usage Guidelines 1
Every WLAN created is mapped to an index. When an ACL is applied on a WLAN index it
becomes a WLAN ACL. The following type of ACL's can be applied on a WLAN:
• IP Standard ACL
• IP Extended ACL
• MAC Extended ACL
WLAN number.
• <1-99> — IP standard access list.
• <100-199> — IP extended access list.
• <1300-1999> — IP standard access list
(expanded range).
• <2000-2699> — IP extended access list
(expanded range).
• WORD — Access list name.
to
WS5100(config)#