Class - Motorola WS5100 Series Cli Reference Manual

17-4 WS5100 Series Switch CLI Reference Guide
Parameters
bootfile <filename>
Usage Guidelines
Use the
bootfile
image name used for booting the bootp clients (DHCP clients). Only one boot file is allowed
per pool.
Use
[no] bootfile
the bootfile command as only one bootfile exists per pool. The command
removes the exisitng command from the pool.
Example
WS5100(config-dhcp)#bootfile bootexample.txt
WS5100(config-dhcp)#

17.1.3 class

DHCP Config Commands
Associates a DHCP class with a pool. This command is used in Step 4 in the usage
guidelines that follow.
The CLI prompt moves to a sub-instance
changes from
Refer to config-dhcp-class on page 17-5 for
Syntax
class (class name)
Parameters
class (class name)
command to specify the boot image. The boot file contains the boot
command to remove the bootfile. Do not use the <file name> with
(config-dhcp)# class
Sets the boot image for BOOTP clients. The file
name can contain letters, numbers, dots and
hyphens. Consecutive dots and hyphens are not
permitted.
(config-dhcp-class).
to
(config-dhcp-class)
(config-dhcp-class)
Associates a class with a pool and enters the
DHCP pool class configuration mode
[no] bootfile
The configuration mode
.
a command summary.