15-2
WS5100 Series Switch CLI Reference Guide
Command
terminal
15.1.1 clrscr
Standard ACL Config Commands
Clears the display screen
Syntax
clrscr
Parameters
None
Example
WS5100(config-std-nacl)#clrscr
WS5100(config-std-nacl)#
15.1.2 deny
Standard ACL Config Commands
Specifies packets to reject
Syntax
deny(A.B.C.D/M|any|host)
deny any(log|rule-precedence)
deny any log(rule-precedence)<1-5000>
deny any rule-precedence<1-5000>
deny host A.B.C.D
Parameters
A.B.C.D/M
any
Table 15.1 Standard ACL Config Command Summary (Continued)
Sets terminal line parameters
Sets the source IP address range to match
Any source IP address
• log – The log matches against this entry
• rule-precedence <1-5000> – Determines the
access-list entry precedence
Description
Ref.
page 15-11