11-6
WS5100 Series Switch CLI Reference Guide
11.1.9 no
Trustpoint (PKI) Config Commands
Negates a command or sets its defaults
Syntax
no <previous command used>
Parameters
None.
Example
WS5100(config-trustpoint)#no ip-address
WS5100(config-trustpoint)#
11.1.10 password
Trustpoint (PKI) Config Commands
Sets the challenge password (applicable only for requests) to acces trustpoint.
Syntax
password(0|2|WORD)
Parameters
0
2
WORD
Example
WS5100(config-trustpoint)#password 0 TestPassword
WS5100(config-trustpoint)#
Password is specified as UNENCRYPTED. The password
should be between 4 to 20 characters
Password is encrypted with password-encryption secret.
The string length of encrypted password should be between
44 - 64 characters
Sets the password (4 to 20 characters)