Rad-User - Motorola WS5100 Series Cli Reference Manual

19-12 WS5100 Series Switch CLI Reference Guide
<0-59>
vlan
<1-4094>
wlan
<1-32>
Example
WS5100(config-radsrv-group)#policy day weekdays
WS5100(config-radsrv-group)#
WS5100(config-radsrv-group)#policy time start 12 12 end 22 22
WS5100(config-radsrv-group)#
WS5100(config-radsrv-group)#policy vlan 20
WS5100(config-radsrv-group)#
WS5100(config-radsrv-group)#policy wlan 20 21 22 23
WS5100(config-radsrv-group)#

19.1.7.9 rad-user

Radius Configuration Commands
Adds an exisitng RADIUS user to this group. If the RADIUS user is not available in the
Onboard RADIUS server's database, create a new RADIUS user using the
command from within the
rad-user on page 19-22
Syntax
rad-user
Parameters
WORD
Example
WS5100(config-radsrv)#rad-user user1 password user1
WS5100(config-radsrv)#group group1
WS5100(config-radsrv-group)#rad-user user1
WS5100(config-radsrv-group)#
Sets the minute (mm) access limit
Sets the VLAN ID for this group
Defines the VLAN range
Sets the WLAN access policy for this group
Sets the WLAN index
(config-radsrv)
Existing RADIUS user name
mode. For more information, see
rad-user