Broadcast-Tx-Speed; Client - Motorola WS5100 Series Cli Reference Manual

20-10 WS5100 Series Switch CLI Reference Guide

20.1.9 broadcast-tx-speed

Wireless Configuration Commands
Configure the rate at which broadcast and multicast traffic is transmitted between the
switch and mobile unit
Syntax
broadcast-tx-speed(range|throughput)
Parameters
range
throughput
Example
WS5100(config-wireless)#broadcast-tx-speed range
WS5100(config-wireless)#
WS5100(config-wireless)#broadcast-tx-speed throughput
WS5100(config-wireless)#

20.1.10 client

Wireless Configuration Commands
Use this command to configure a wireless client. This command creates an exclude-list or
include list. Creating a list moves the user to a new mode
("
config-wireless-client-list
for a
(config-wireless-client-list)
Syntax
client {exclude-list|include-list}(NAME)
Parameters
exclude-list
Uses a lowest basic rate. Provides maximum range
Uses a highest basic rate. Provides maximum throughput
(default)
"). Refer to config-wireless-client-list on page 20-12
command summary
Sets the wireless client exclude list configuration. A MU
NAC check is conducted, except for those in the exclude
list. Devices in the exclude list will not have a NAC check
performed