Multicast-Packet-Limit; Multicast-Throttle-Watermark - Motorola WS5100 Series Cli Reference Manual

20-26 WS5100 Series Switch CLI Reference Guide
WS5100(config-wireless)#mobility max-roam-period 10
WS5100(config-wireless)#
WS5100(config-wireless)#mobility peer 157.208.235.108
WS5100(config-wireless)#

20.1.25 multicast-packet-limit

Wireless Configuration Commands
Sets a multicast packet limit (per second) for a VLAN. This limits broadcast/multicast
packets per VLAN. The default vlaue is 32 broadcast/multicast packets per second
Syntax
multicast-packet-limit <1-128> (<1-4094>|<vlan range>)
Parameters
<1-128>
<1-4094>
<vlan range>
Example
WS5100(config-wireless)#multicast-packet-limit 120 50
WS5100(config-wireless)#
WS5100(config-wireless)#multicast-packet-limit 120 1,10,25
WS5100(config-wireless)#

20.1.26 multicast-throttle-watermark

Wireless Configuration Commands
Configures watermarks for supporting bursts of broadcast/multicast frames
Syntax
multicast-throttle-watermarks (low)<0-100> (high) <0-100>
Sets the multicast packet limit per second
Defines the single VLAN ID (1-4094) the new limit applies to
Defines the list (1,3,7) or range (3-7 ) of VLAN IDs