Quit; Telnet - Motorola WS5100 Series Cli Reference Manual

3-8 WS5100 Series Switch CLI Reference Guide
128 bytes from 192.168.2.100: icmp_seq=0 ttl=128 time=2.7 ms
128 bytes from 192.168.2.100: icmp_seq=1 ttl=128 time=38.4 ms
128 bytes from 192.168.2.100: icmp_seq=2 ttl=128 time=4.6 ms
--- 192.168.2.100 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 2.7/15.2/38.4 ms
WS5100>

3.1.9 quit

User Exec Commands
Use this command to exit the current mode and move to the previous mode
Syntax
quit
Parameters
None
Example
The switch logs off upon execution of the command

3.1.10 telnet

User Exec Commands
Opens a telnet session
Syntax
telnet [IP address|hostname]
Parameters
[IP address|hostname]
Example
WS5100#telnet 157.111.222.33
Entering character mode
Escape character is '^]'.
Red Hat Linux release 9 (Shrike)
Kernel 2.4.20-6bigmem on an i686
login: cli
Password:
Defines the IP address or hostname of a remote system