13.1.7 no
mst Config Commands
Negates a command or sets its defaults
Syntax
no [instance|name|revision]
Parameters
instance
name
revision
Usage Guidelines
The
command negates any command associated with it. Wherever required, use the
no
same parameters associated with the command getting negated
Example
WS5100(config-mst)#no instance 10 vlan 20
WS5100(config-mst)#
WS5100(config-mst)#no name MyRegion
WS5100(config-mst)#
WS5100(config-mst)#no revision
WS5100(config-mst)#
13.1.8 revision
mst Config Commands
Sets the revision number of the MST bridge
Syntax
revision <0-255>
Parameters
0-255
Sets the MST Instance
Assigns a name to the MST region
Defines the revision number for configuration information
Defines the revision number for configuration information
spanning tree-mst Instance
13-5