Starting A Printer Cleaning Cycle; Cleaning The Magnetic Stripe Head - DataCard ImageCard series Manual

3-8
Day-to-day printer use

Starting a printer cleaning cycle

To begin a cleaning cycle, select the Printer button in the Cleaning section of
the status monitor window, or right click on the status monitor icon and
select Clean printer now from the popup menu. For further information see
Performing a cleaning cycle on page 3-12.

Cleaning the magnetic stripe head

Click on the Clean mag stripe button to clean the magnetic stripe hardware
in the printer. See Cleaning the magnetic stripe head on page 3-17 for
instructions.
Figure 3:-5 The status monitor and its status information
In diagnostics mode you cannot select the Printer button to perform a
cleaning cycle.
Line 1
Line 2
Line 3