Table of Contents
Advertisement
OC sensor types
Note: Due to its linear characteristic, a linear sensor is by default
exactly defined by only two input values, the minimum and
the maximum. The range for LC sensors is 0 - 1 Units, by
default.
•
Linear output value - entry of the minimum and maximum
value of the linear output range which has to correspond to
the linear input value range, in the engineering units which
have been selected;
•
Verifier - entry of the minimum and maximum value within
which valid sensor measurement results can be expected. If
the values are outside the preset thresholds, an invalid sensor
value will be notified;
•
Display scale - enter the minimum and maximum value for
scaling which should to be displayed on the trend graph
"Sensor data graphic".
The "Sensor type" window provides the following window areas
for OC sensor types:
•
Common settings - for entering the common definitions of
the sensor type, especially determining its technology;
•
Output settings - for determining the output channel of the
OC sensor;
•
Conversion settings - for determining the method of
conversion of input values to output values or to define a
sensor table for conversion, respectively.
CHAPTER 4
Sensor Type Configuration
199
Advertisement
Table of Contents
