Table of Contents
Advertisement
Figure 128. NTP Detail - Job dependent settings
•
Broadcast enabled - if this checkbox is marked, the A850 will
broadcast time messages allowing all listening clients to time-
synchronize to these messages;
•
Clients enabled - if this checkbox is marked, clients are
allowed to send time requests for getting time messages (in
this case, the A850 acts as NTP server);
Primary Server
Allows to enter the data to access your primary NTP server:
Figure 129. NTP Detail - Primary Server
Host name - enter the name of the primary NTP server which you
selected in the Internet.
Secondary Server
Figure 130. NTP Detail - Secondary Server
Allows you to enter access data for selecting an alternative NTP
server.
Note: As a matter of principle, a secondary NTP server is not nec-
essary for time synchronization - it's just an enhancement of
the redundancy of your Network.
125
CHAPTER 3
Advertisement
Table of Contents
