Table of Contents
Advertisement
298
CHAPTER 5
Console Commands
Configuration
Figure 341. Send New Firmware Image File to the A850
Note: The transmission of the firmware image file should have
been successfully executed if the "file send" window has
disappeared again and no transmission error is displayed in
the console dialogue.
Note: After a successful firmware upgrade, you have to reboot
your A850 anew so that the new firmware will be activated.
In any case, after a firmware upgrade, you have also to enter
date and time anew; otherwise, please adhere to the
upgrade instructions ("read me.txt") accompanying your
new firmware.
----------------------------Console Dialog End-----------------------------
Configuration Quick setup
In Quick setup, the setup of the A850 is performed only with the
most important information, i.e. only the information is necessary
which is required for the internal LAN operation of the A850 where
the A850 independently establishes the IP addresses and activates
its DCHCP server function.
Note: In order to ensure that no default password can be used
which would thus endanger the security of the A850, it is
Advertisement
Table of Contents
