118
CHAPTER 3
Configuring the Gateway
Figure 118. Method selection
•
Format - allows to select the format in which notifications are
sent; notifications can be sent in formats "path", "short" or
"name". The format specifies how the sender of the
notification is identified in the E-mail/SMS/HTTP request:
•
short - the sender is only identified by its node ID
contained in the message;
•
name - the message contains the name of an user-
configured Gateway, RTU or sensor;
•
path - the names of the Gateway, the RTU and the sensor
concerned are contained in the message, concatenated
like a directory path;
Figure 119. Format selection
•
URL - for entering the address of the recipient of notifications;
•
From - for entering the name of the sender of notifications;
•
Subject - for entering a general message title;
•
Server IP addr. - for entering the IP address of your SMTP
server.
Note: To enter "From", "Subject" and "Server IP addr." is only
necessary if the notifications are to be sent via E-Mail.