Adcon A850 User Manual page 94

Telemetry gateway base station
Hide thumbs Also See for A850:
Table of Contents

Advertisement

94
CHAPTER 3
Configuring the Gateway
Figure 83. PPP Configuration - Job scheduling - Mode
Note: The job scheduling layed down can be oversteered by the
commands "Start Job" or "Stop Job" according to Fig. 43
or 46, respectively.
Mode - in this combo box, the time of establishment of a PPP
connection is determined, featuring the following selections:
dhcp reconfig - to re-establish your former dhcp settings
after having changed them in the tree window
"Networking";
never - to prevent an PPP connection to be established
automatically;
ppp connect - to force a PPP connection to be
established automatically;
interval - to force a PPP connection to be established at
certain regular intervals (the interval in seconds has to be
put into the field "Interval [s]"):
Figure 84. PPP Configuration - Job scheduling - Mode - Interval
always - to force an internet connection to be always
established;

Advertisement

Table of Contents
loading

Table of Contents