Change Frequencies - Adcon A850 User Manual

268
CHAPTER 4
Using the Gateway

Change Frequencies

Note: This function is not yet implemented!
Figure 311. RTU Context Menu - RTU Communication Management -
The frequencies of all RTUs connected to a Wireless Modem will
be changed.
Note: The frequency change starts in each route at the most dis-
tant RTU.
Figure 312. Change frequency window
Select Wireless modem
This window gives access to the following selections:
• Wireless modem - selection of the respective Wireless
modem for which the frequency is to be changed;
• Radio frequency - enter the frequency which is to be used for
communication between the Wireless Modem and the RTUs.
Note: If the frequency of a Wireless Modem is changed, the fre-
quencies of all RTUs communicating with it will also be
changed to this frequency.
Change Frequencies