Table of Contents
Advertisement
276
CHAPTER 4
Using the Gateway
Common details
Figure 320. Sensor details - Common details
•
Name - displays the name defined for this sensor which can
be modified;
•
RTU name - displays the name of the RTU where the sensor is
attached;
•
RTU code - displays the code of the RTU where the sensor is
attached;
•
Sensor type - displays the type defined for this sensor in the
"Sensor Type Configuration";
•
EUnit - displays the engineering unit defined for this sensor in
the "Sensor Type Configuration";
•
Node ID - allows to enter or change the node ID concerned;
•
Installation date - displays the date when the sensor was
installed;
•
Maintenance date - displays the date the sensor was
maintained the last time;
•
active:
•
if "active" is checked, the sensor values will be saved in
the database;
•
if "active" is not checked, the sensor values will be
ignored.
Special sensor settings
Depending on the type of the sensor, special entries are possible
via this menu.
Advertisement
Table of Contents
